Carpet Cleaning Methods

carpet cleaning

Carpet cleaning is a service done to restore cleanliness to homes. Carpet cleaning can be done on-site or can be done by professional cleaners. Common ways to clean carpets include steam cleaning, dry-cleaning, and spot-cleaning. Learning the effects of carpet cleaning on allergic individuals will help you determine if it’s a good idea for you to do your carpet cleaning.

Cost

Many factors can affect how much carpet cleaning session costs. The most obvious factor is how much dirt the technician has to pick up. The more dirt the cleaner has to remove, the more it will cost. High traffic areas, like living rooms, will have to be cleaned more often due to the number of visitors. Other areas, such as those with few visitors or where no dirt is present, can be regularly cleaned without spending a lot of money.

When there’s no dust or pet hair to contend with, dry-cleaners can use a low moisture technique. This technique requires no water or moisture, meaning no residue left behind. Some dry-cleaners use steam to increase the drying time. Dry-cleaners can also use a low moisture technique when there is no moisture present, which makes for a faster drying time.

Another factor to consider is the type of carpet being cleaned. High traffic, low traffic, or areas prone to harbouring mould and mildew can be affected by over-wetting. High traffic areas that are frequently wet can soak up gallons of water in just one wash. This can result in a substantial amount of water left behind in the area. Over-wetting can also accelerate the growth of mould and mildew.

Cleaning Methods

High-traffic areas can benefit from pre-wet cleaning methods. These methods can help loosen up dirt that has worked its way deep into the fibres. This pre-wet cleaning method can be more expensive than standard cleaning methods, but it can save the consumer hundreds of dollars in the long run by saving the consumer from having to replace expensive carpets that have been deeply stained by dirt and grease.

carpet cleaning

Standard carpet cleaning methods are beneficial for keeping mould and mildew at bay. However, they can be detrimental to certain fibres. Certain fibres can absorb liquids that can penetrate the fibres, such as juices from drinks or other liquids spilled on the carpet. Standard cleaning methods can weaken these fibres. The carpet cleaning process can also damage the carpet. Also, chemicals in standard cleaning solutions can cause irreparable damage to delicate fibres.

Risks

Many cleaning agents can cause permanent discolouration of carpets, as well as serious health problems. Some cleaning agents can leave a harsh residue that can attract dirt and allergens. Professional cleaners with thorough training in how to safely use cleaning agents can minimize health risks while protecting the carpet from further harm. Some cleaning agents can also leave chemicals on furniture and other surfaces after cleaning. Chemicals left behind can also irritate allergies and other health conditions.

With a properly trained professional, there is no risk of damaging the carpet or its fibres, nor do chemicals need to be applied to the carpet. Standard cleaning methods can damage the carpet and cause health problems and other issues. A trained cleaner can preserve the carpet’s integrity and protect the environment.

DIY

Vacuuming alone can not remove all the dust and dirt particles from carpeting. Even vacuum cleaners can not completely remove all dust and dirt particles. The best way to reduce the amount of dust and dirt particles in a room is to have regular vacuuming. But to reduce the amount of static electricity generated by moving the furniture around can sometimes help. Static electricity can produce much more dust and dirt than normal airflow can. Regular vacuuming will greatly reduce the amount of static electricity generated in the room.

There are two basic types of carpet-cleaning processes: dry powder-based system and water extraction. Dry powder-based systems dry the carpet thoroughly by using a water extraction system, which the homeowner controls. In a dry powder-based system, the homeowner mixes a solution with cleaning water and applies it to the carpet. The dirt and soil particles are attracted to the water molecules and drawn into the solution. Then the solution dries. This can cause a residue to build upon the carpet fibres once dry powder-based carpet cleaning is done.

Water extraction (sometimes called wet shampooing or wet rinse) is a method used in some industries and can be better for rugs and carpets than dry powder-based cleaning methods. The process of wet shampooing involves spraying the carpet with a strong detergent solution that draws the soil and dirt particles into the detergent solution. The detergent solution is left on the carpet for a short time, which allows the soil and dirt particles to permeate the solution into the carpet fibres. The detergent left on the carpet can pull up soils and dirt from deeper inside the carpet fibres. This can result in heavier soiling and dirt accumulation on the carpet fibres than can be achieved with dry powder-based carpet cleaning methods.